Search POSGuys.com FAQ Pages
How do I set up my cash drawer to kick when my Epson TM-T88IV prints a receipt?
How do I enable a carriage return (enter key) suffix on my LS2208?
My Epson TM-T88IV receipt printer cuts off the receipt halfway through, then continues to print the rest. It also functions erratically otherwise, printing stretches of blank paper, and behaving incorrectly. How can I fix it?
What is the difference between laser barcode scanners and imagers, also known as CCD barcode scanners?
- I would like the cash drawer to open with every print job. How do I do that?
How do I locate and install drivers for my Epson printer?
- Why is my Honeywell barcode scanner not sending any data to the PC? Why is it not entering items automatically when I scan them?
What is the difference between 1D barcodes and 2D barcodes?
Where can I find drivers for my printer?
I purchased an additional user license for Aldelo, but am unable to connect to my existing database. How can I get this license to connect?
- How do I configure my barcode scanner to leave off the final digit of my UPC barcodes?
How do I install my USB barcode scanner?
When I attempt to launch Aldelo, I receive a "path not ready" error. How do I fix this?
- My Zebra TLP 2824 Plus is printing on only half the label. How can I make it print on the whole label?
Can I scan barcodes directly from a cell phone or similar device?
How do I create my new database in Cash Register Express?
- Why is my Printer not printing?
How do I install my POS-X network (Ethernet) printer?
- How do I get the cash drawer to open?
I received and connected my POS-X printer, but it does not work. What can I do?
How do I adjust the darkness on my Epson ReadyPrint T20?
How do I test a cash drawer with my Epson or Epson-compatible (e.g. POS-X, Citizen) printer?
How do I configure my POS-X XP8200 pole display (customer display) to work with Proxis Store Manager Classic?
- Why is my USB printer not printing a Windows test page?
- How do I connect a new Aldelo station to an existing network?
- What is the difference between the LS2208 and LI2208 barcode scanners?
Which Metrologic USB cable is the correct cable for my Metrologic or Honeywell Voyager MS9500 (MS95xx) barcode scanner?
What are the configuration guides for POS-X (XM95 and XM130) and ID Tech (MiniMag) magnetic stripe readers?
How do I register Aldelo for Restaurants?
Why does the LS2208´s laser only work for a few seconds then turn off?
How do I perform a return in Cash Register Express?
- What are some useful commands I can use with my Zebra printer under the printer commands section?
- What can I do if the default user ID and password don´t work when trying to access the back office in Aldelo PFR?
Amigo Point of Sale keeps logging me out. How do I disable the auto logout feature?
Can the Epson TM-T88IV receipt printer be set to print to other paper widths than 80mm?
- Where is the power button/switch for the Star Micronics TSP100 and the TSP100 ECO?
How do I change the default amount of cash listed in the drawer at the beginning of the day in Proxis Store Manager?
- When I scan a product, why does a different number show up than the number I entered into my software for that product?
- How do I open a serial cash drawer with command prompt?
My USB receipt printer worked in the past, but has stopped printing. How can I get it to print again?
When I open the Configuration screen for Quickbooks integration in Cash Register Express, I do not see all of the menu options I expect. How do I locate them?
How do I export my Stock Manager inventory to Microsoft Excel?
- When processing returns in Cash Register (Actions > Sales Return), F7, F8, and F9 are grayed out (not available). How can I fix this?
- How do I change the size of the font on my Kitchen Printers in Aldelo For Restraunts?
When pairing the CS3070 to an iPad, the on screen keyboard disappears. How do I prevent that from happening?
- When opening Databases in Store Manager Office nothing happens. The computer appears to freeze and the Store Manager Office screen does not change. How can I fix this?
Do I need software to go along with my barcode scanner?
- Why is my Zebra label printer giving a red error light and feeding backwards into the printer?
How do I print a Windows test page?
- How can I edit my inventory in the inventory setup in Aldelo?
- How can I get my scanner to read Codabar barcodes?
- How do I install the Store Manager POS database on a network drive?
- How do I get Aldelo to only print receipts when settling out orders?
How do I configure my POS-X XP8200 pole display to work with pcAmerica Cash Register Express?
How do I install my PS/2 (keyboard wedge) barcode scanner?
- How to get the scanner to have an AIMING dot?
Is the POS-X EVO touch monitor compatible with Linux?
- I am receiving errors in Store Manager Register and the software closes when accessing product details for some items. How can I fix this?
How do I install drivers for my USB interface printer using Windows?
- Why are my daily sales totals the same as my monthly sales totals when viewing the Sales, Cost Profit report in Store Manager Classic?
- How can I get the cashdrawer to open whenever my XR500 or XR520 printer prints?
Stock Manager indicates that msstdfmt.dll is not installed. How can I fix this?
What are the ESC codes to have the printer print in red?
How do I add part-time employees in Aldelo?
Keychain Synch prompts for activation every time you open it. How can I fix this?
- What paper can I use in my receipt printer? Where can I get paper?
Does the POS-X EVO touch monitor integrate with my current point-of-sale or point-of-service software system?
Which barcode scanner interface should I buy?
- Why is my sales tax not being applied?
- I am having problems generating the quick books export file. I get an "20477 Invalid File Name". How can I export the file?
- My V-Line barcode scanner will not scan Interleave 2 of 5 barcodes. How can I enable this?
My scanner will not read my Code 3 of 9 barcodes, is there a configuration I can do to fix this?
- The data integrator in Proxis Stock Manager is not functioning correctly and is not uploading my data. How can I fix this?
How do I set up my receipt printer and cash drawer in Amigo Point of Sale?
- The Xi3000 scanner is adding an extra zero at the beginning of every scan. How can I stop this?
Why is my keyboard wedge (PS/2) barcode scanner not being detected?
- Customer is unable to process any sort of transactions (Settle, Cash out, Gift Cert, Refund) in Aldelo. The options are grayed out on the main screen. How can I fix this?
- What do I do if I get an error 70 message when processing credit cards?
- I Get an Error 484, Problem Getting Printer Information..........., when starting the Cash Register. How can I fix this?
How do I setup a menu item to print to a specific kitchen printer in Amigo Point of Sale?
How can I get the scanner to store barcodes when I go out of range with the Xi3000?
- How can I prevent my register from allowing negative quantities?
- How to do I setup bottle deposits in Store Manager Classic?
What touch controller does the POS-X EVO touch monitor use?
- How do I enable my ipad/ipod scanner to work with the iCody app on my mobile device?
- What is the difference between direct thermal and thermal transfer?
- How do I backup my database / move my inventory to another location for Store Manager Classic?
How do I get the scanner to perform a carriage return after each scan?
- How can I have the scanner perform two tabs at the end of every scan with the Xi2000?
- How do I change the start and stop sentinels on my Xm90?
- How do I print a detailed report of my product sales in Store Manager Classic?
Can I mount my POS-X EVO touch monitor using a standard LCD mount?
What is PayPros?
How do I perform a layaway transaction in Store Manager classic?
- Store Manager Classic gives the message "PC Charge is not running" when trying to process credit cards. How can I fix this?
- How do you use the regular Com port settings instead of using Epson's installed ESD port when installing a serial printer?
- Why am I receiving a "device not recognized" message using my barcode scanner?
How can I test my printer-driven cash drawer without point of sale software?
- Why do I get an error ´3000´ reserved error while attempting to work with database?
- What information can Proxis Store Manager export?
Is PayPros's (Previously Payment Processing Inc. or PPI) software compatible with Quickbooks?
What is a contact scanner?
- I need to change the database location without being able to open Stock Manager. How can I do this?
Can I use a phone cable to connect my printer-driven cash drawer to my printer?
Which scanner models are compatable with Quick Books Premier?
- The Store Manager Classic software will not allow a second copy of the receipt to be printed, and it is giving me an error. How can I fix this?
- I am running Windows WePOS and my help file is not functioning. Why?
Does the monitor I purchased come with cables?
- Is the Symbol LS2208 the same as the Motorola LS2208?
How do I get my POS software to open my cash drawer?
- In Barcode+, how do I set up a Session to count items?
My receipt printer cuts off my receipts, prints another two inches, then cuts again. Why?
Is PC Charge really free through PayPros?
What kind of IDs can the Code CR3500 verify?
- My scanner is not transmitting, it is just does several beeps after I scan something. How can I fix it?
My Scanner will not scan any barcodes, how can I fix this?
- How do I refund a customer their balance on their accounts?
- How do you enable the check box "apply tax 1 to discounts" in Store Manager Classic?
Which receipt printers will work with Windows 7?
Why is my printer printing slowly with WindowsME?
- Why isn´t my Kitchen / Bar / or Recipt printer printing?
- How can I set the software up to print labels based on my inventory quantity?
- How do I get my cursor to match the input from touching the screen?
- How can I make the Cash Register ask me if I want identify the customer for Store Manager Classic?
- How do you select the printer interface type with the memory switch on an Epson printer?
Which printers work with TekLynx Label Matrix?
- My touchscreen was working fine until recently. What could have caused it to stop working?
- Why is my printer printing a long white space in my receipts in Aldelo?
- How do I setup credit limits for my customers in Store Manager Classic?
Is it possible to use one language for normal functions in Aldelo, and another for kitchen prep tickets?
Is the payment terminal hardware really free through PayPros?
When PCI compliance laws change does PayPros transition existing customers to new PCI standards?
What kind of support does PayPros provide to make it stand out from the competition?
- What printers work with Square systems?
What equipment is required to operate a printer-driven cash drawer?
How are PayPros merchant account rates determined?
What information is usually required to apply for a merchant account with PayPros?
What is the wi-fi frequency on the PartnerTech EM-200 series tablet PCs?
I already have a POS system with gift card information saved in the Database, can I transfer over my existing gift cards to a new POS application?
Does the V-Line Shooter include software? Is it Mac-compatible?
- Does the auto-sense stand automatically take the LI2208 into triggered mode when out of the stand?
- I've scanned the interface setup for my Motorola/Symbol scanner and now it has stopped working. How can I fix it?
- Is there a touchscreen or touch monitor for a Windows 98 PC?
- How do you install the Bluetooth version of the TM-T20II?
- I get a “Serv Not Allowed” error when I try to run EBT transactions within Cash Register Express, what can be causing this?
- Why is my Epson printer not recognized on my computer?
- Can I use a USB scanner on my iPad?
- Is Aldelo Touch compatible with Aldelo Pro for Restaurants?
- How do I backup my Aldelo database?
- Will my POS-X Thermal or Impact printer work with Windows 10?
- How do I use Memory Settings on a printer?
- My Zebra printer is still printing on half the label after calibration. How can I get it to print on the whole label?
- What do you need to process credit cards with Aldelo Touch?
- How can I send a carriage return on a Dolphin Black mobile computer?
- My XM95 is reading inconsistently. How can I fix this?
- In Cash Register Express, what are Tag Along items?
- I've enabled the buzzer for the Epson in the driver, why isn't it working?
- Can I configure an ID Tech, POS-X or Magtek MSR (Magnetic Stripe Reader) on a Mac based operating system?
- Cash Register Express is prompting that it needs to be registered, but won't bring up the registration screen. How can I bring up the screen?
- My LI4278 doesn't seem to be charging properly, what can I do?
- What voltage do cash drawers typically run on?
- My EVO-RD4-VFD isn't receiving power after I connected to my EVO-TP4 terminal. How can I fix this?
- How do I change the volume of my scanner?
- How do I import inventory into Stock Manager?
- Which receipt printers are compatible with the Windows 10 operating system?
- What kind of cash drawers are compatible with Apple iPads and iMacs?
- Why can't I use VISA Giftcards in Cash Register Express?
- Can Cash Register Express integrate with Restaurant Pro Express?
- The EZ-DL scanning function is not working on my scanner. How can I fix this?
- How do I manually Calibrate my GK420 Zebra Printer?
- How do you modify employee break times in Cash Register Express?
- My Logic Controls USB PDX3000/PD3000 Pole Display is not displaying anything or turning on. How can I correct this?
- Why does the Total for the Sales Summary in the Aldelo Closing Report not match the Total in the Total Payments Received Summary?
- How do you stop the magnetic stripe info from printing on a Datacard Printer?
- How do I input a logo into my TSP100 Thermal printer?
- Can I use gift cards in Quickbooks without signing up for a gift card account?
- When scanning into Lightspeed POS, the barcode flashes and then instantly disappears without adding the item to the invoice. How can I fix this?
- Why are my labels not lining up on the tear bar on my Zebra label printer?
- Which APG cash drawer cable do I need for my Ithaca printer?
- How do I look up sales totals on a specific date in Store Manager Classic?
- How do I get my printer to cut when using a Generic/Text Only driver?
- Will any router work with my STAR Ethernet printer?
- Why is my 1D or vertical line barcode so long?
- How do I configure the wireless function on an Epson TM-T88V to work on my wifi network?
- How do you calibrate a G-series Zebra Printer?
- How long of a USB cable can I use?
- Why did the Cash Register Express prices increase?
- How do you enable the buzzer on a POS-X Thermal Printer?
- How do I install an Epson Ethernet Printer?
- How do you manually set the transaction number within Proxis Store Manager?
- Can I reset my ELO TouchComputer back to factory defaults?
- Can I use the EpsonNet Configuration utility to find an Epson printer on my network, over the internet?
- Why is my wireless scanner not charging?
- How do I configure an Epson Ethernet receipt printer on a MAC system?
- Can I use the same receipt printer on both a MAC computer, and a Windows computer?
- I can't seem to install my receipt printer driver. It says that there is not a driver signature. How do I fix this?
- How can I enable a carriage return on my Zebra/Motorola/Symbol barcode scanner?
- How do I install a Star Ethernet Printer?
- My Heron HD3130 is refusing to use solid colors. When I scan it it gives 3 beeps but then still doesn't hold its color?
- Star TSP100 does not communicate over my network, after installing. What could be causing this?
- Can you update multiple menu item prices in Aldelo?
- Can Aldelo for Restaurants use a Scale for By-Weight Purchases?
- Can you create estimates/quotes in Cash Register Express?
- How can I configure my Zebra scanner to scan all uppercase or lowercase?
- How do I upgrade from Store Manager 4.5 to 4.61?
- How do I enable the check endorsement feature on an Epson TM-H6000IV printer?
- What do I do, if Store Manager gets a ‘Microsoft Jet’ error, and won’t load the database?
- How do I install, and activate Cash Register Express?
- How do I install, and activate Aldelo?
- Why is my Wireless scanner no longer holding a charge?
- Aldelo EDC appears to be working, but I'm unable to process or log into the integration settings on a second station.
- Can you open a cash drawer in Store Manager, without the printer?
- Can you run a receipt printer on a Mac operating system, using Windows emulation?
- Will my Epson TM-M10 print from Cash Register Express?
- How do you disable the option to take Debit or Check payments within Cash Register Express?
- How do I install my USB interface TM-T88VI?
- Can I use a thermal receipt printer in a kitchen?
- How do I install my Ethernet interface TM-T88VI?
- My cash drawer will not open with my TM-T88VI. What could be causing this?
- How do I install my ZD410 or 2824 Zebra desktop printer?
- My printer is using the correct cashdrawer cable for my printer driven cashdrawer and I've checked all the settings in the driver and software, but it still isn't opening.
- My Star printer wont print from my iPad with Airprint.
- How do I set up a receipt printer or cash drawer with Cash Register Express?
- My Symbol LI4278 still is not transmitting data to the computer, even after pairing to the cradle. How do I fix this?
- How can I adjust tax rates in Cash Register Express?