POSGuys.com iPDT380-2 for iPod

In order to enable this, follow these 11 simple steps.

1. Open the iCody application on your device.
2. If you aren't already on the home screen, click the Home button (it's the house-shaped icon in the bottom right-hand corner of the screen).
3. Click the Settings icon (it looks like a gear, and replaced the image of the Home button in the lower right corner of the screen).
4. Scroll down through the list until you get to the General settings topic.
5. The last option shows External Scanners with an arrow for additional information. Press the External Scanners section.
6. From the list of available devices, swipe your finger across to turn ON the Manufacturer Scanner.
7. Go back to the Settings page (Press the Settings button in the top left-hand corner of your device screen).
8. Scroll up through the options until you come to the Scanner section (it should be directly above the General settings options).
9. Make sure the option for Manufacturer is selected, and that the Built-in Camera is not selected (the checkbox should be to the right of the Manufacturer option).
10. Click the Done button in the top left-hand corner.
11. Your device is now setup to scan with iCody, using your Manufacturer device.
[Read More]