Setting Up The TSP100IIIBI Bluetooth Printer
By: POSGuys Support - 4/2/2020

<b><u>Setup and Connect the TSP100IIIBI</u></b>

Unlike the TSP100IIIW, the Bluetooth interface doesn't have a PAIR button. The printer should go into a pairing/discover mode shortly after it is powered on. If the printer was paired to any computers or devices previously, remember to remove/forget it from the Bluetooth list before pairing it with a new device. After that refresh the Bluetooth discovery list on the device you would like to pair the printer to.

If you still have issues discovering the printer, reinitialize the Bluetooth settings with these steps:

1. Turn the printer off
2. Press and hold the RST button on the back of the printer
3. Turn the printer back on while holding the RST button
4. Continue to hold the RST button until the printer resets twice, then release it
- The printer will make a sound on each reset
5. Power the device off and then back on
	![enter image description here][1][][]

[1]: https://posguys.blob.core.windows.net/content/images/blog/24/Star_initializingBluetooth.png

Share this post:

Setting Up The TSP100IIIBI Bluetooth Printer By: POSGuys Support - 4/2/2020

Recent Posts By POSGuys Support

Setting Up The TSP100IIIBI Bluetooth Printer
By: POSGuys Support - 4/2/2020