Setting up the Star Micronics TSP100IIIW
By: POSGuys Support - 3/26/2020

<h1>Connecting the printer to your network</h1>
<h2>Using WPS</h2>
<ol>
<li>Press and hold the PAIR button on the back of the printer until the LED light on the printer flashes blue</li>
<li>Press the WPS button on the Wireless Network Router or Access Point</li>
<li>When the printer connects to the network the blue light will stop flashing and turn solid.</li>
<li>A small receipt should print, listing the connected networks details.</li>
</ol><hr />
<h2>Using The Web Configuration portal</h2>
<ol>
<li>Once you have the paper installed, plug in the printer and power it on. It should automatically go into AP (Access Point) Mode.</li>
<li>Perform a self-test print to get the Network Configuration info<br />
<ul>
<li>Turn off the printer</li>
<li>Hold down the FEED button and turn the printer back on while still holding it</li>
<li>Once the printer starts to print, release the FEED button</li>
</ul>
</li>
<li>Use a phone, tablet, or computer with Wi-Fi access to search for a network starting with TSP100III. It should appear as TSP100III-XXXXXX the X being the last 6 digits of the MAC address that can be found on the self-test page mentioned earlier.</li>
<li>Once connected to that network, open a web browser and enter the address 192.168.10.1<br />
<ul>
<li>NOTE: If the Self-Test Page shows a different IP Address, use the one located there.</li>
</ul>
</li>
<li>A page showing TSP100III Network Utility should appear<br />
<ul>
<li>Click on the Login link located on the left hand side of the page</li>
<li>The default login information is:</li>
</ul>
</li>
</ol>
<h5><span>User:</span>&nbsp;root</h5>
<h5><span>Password:</span>&nbsp;public</h5>
<hr />
<ul>
<li>Once logged in, click WLAN Settings<br />
<ul>
<li>Select Infrastructure Mode</li>
<li>Enter the SSID or name of your wireless network, double-checking to make sure it is correct (if entered incorrectly, you may need to factory reset the printer and start the process again from step 1).</li>
<li>Select Security Type; commonly WPA2/AES</li>
<li>Enter Wi-Fi Password (this is case sensitive)</li>
<li>Click Submit</li>
</ul>
</li>
<li>Click on IP Parameters location to the left. If you would like your network to provide the printer with an IP automatically, leave it set to DHCP. Otherwise select the Static option and enter in the desired IP information.</li>
<li>Click on Save located in the menu of the left side of the page. Follow the steps to save and reboot the printer</li>
</ul>
<p>After the printer has rebooted, it will attempt to connect to the Wi-Fi network. Please be aware that is process can take several minutes. Once complete the light on the front of the printer should stay solid.</p>
<hr />
<h1>Installing the printer on your computer</h1>
<ol>
<li>Download the install utility from our product page:&nbsp;<a href="https://posguyslocal/download/tsp100_V770_setup.EXE">TSP100III Windows Driver</a></li>
<li>Go to your Downloads Folder and double click the Setup Utility which may look something like&nbsp;<span>tsp100_V770_setup.exe</span>&nbsp;to start the installation.</li>
<li>Follow the setup steps to install the printer driver onto your computer.</li>
</ol>
<h2>Adding the configured printer to your computer</h2>
<ol>
<li>Open your&nbsp;<span>LAN &amp; Bluetooth Setup Tool</span>&nbsp;which should be in your&nbsp;<span>StarMicronics Folder</span>.</li>
<li>Select&nbsp;<span>Discovery</span>&nbsp;to search for the newly setup printer and select it from the list.</li>
<li>Now, select&nbsp;<span>Printer Queue</span>&nbsp;where you can change the name and set it as a default printer or not. We suggest to check&nbsp;<span>Print Test Page</span>&nbsp;to ensure it works. Next, select apply.</li>
</ol>

Setting up the Star Micronics TSP100IIIW By: POSGuys Support - 3/26/2020

Recent Posts By POSGuys Support

Setting up the Star Micronics TSP100IIIW
By: POSGuys Support - 3/26/2020